Optical End-Stop

Optical End-Stop
Optical End-Stop - These end-stop's have a much better repeatability than the micro swithes. See description below.


Availability: 3 in stock

Delivery date: 1-2 business days before shipment

These end-stops already have all the electronics already built in. Just connect the swith to the three pins on the ramps1.4 where the pins are:

                            Vcc - 5V input from the ramps. It is usually the pin not connected to the microswitches.

                            Gnd - The pin next to Vcc.

                            Signal - The leftover pin, nearest to the side of the board.