HC-06 - Bluetooth Module.

HC-06 - Bluetooth Module
HC-06 - Bluetooth module. See full description below.

£4.45

Availability: 5 in stock

Delivery date: 1-2 business days before shipment

HC-06 - Bluetooth module.  - This little module is able to communicate through bluetooth to any serial device. This makes it a perfect companion for your 3d printer and Ramps 1.4 controller board. With this nifty board you can now control your printer with your cellphone if you want to. The specifications are as follows:

Bluetooth protocol: Bluetooth 2.0+ EDR standard
USB protocol: USB v1.1/2.0
Operating frequency: 2.4GHz ISM frequency band
Modulation mode: Gauss frequency Shift Keying
Transmit power: ≤ 4dBm, second stage
Sensitivity: ≤-84dBm at 0.1% Bit Error Rate
Transmission speed: 2.1Mbps(Max)/160 kbps(Asynchronous); 1Mbps/1Mbps(Synchronous)
Safety feature: Authentication and encryption
Supported configuration: Bluetooth serial port (major and minor)
Supply Voltage: +3.3 VDC 50mA
Operating temperature: -20 to 55℃
Size: 36.5*16mm
Weight: 4g

 

You can look at my blog page which will direct you to places to get it up and running.

HC-06 Bluetooth module - You want to go wireless with your 3D printer